Standard Panel Ranges

Standard Panel ranges

FastPanel is quickly developing standardised ranges of panel to suit a wide range of applications. Although we like to promote our capabilities of customised composite panel design, FastPanel are developing pre-designed panel ranges to suit a wide array of specialist applications.

The standard panel ranges of composite panels are well trial and tested solutions typically utilised in the manufacture of durable lightweight assemblies and enclosures.

A client can chose from our standard product range as a starting point and still add on our bespoke additional service solutions e.g. inserts, cut-outs, joint options etc Below describes our main standard ranges of composite panel systems.

GRP Panel Range

FastPanel GRP panel range offers extremely strong and lightweight panel solutions. Ideal for commercial vehicles, specialist wall panels and non slip floors our GRP panels comes in a range of thicknesses with a variety of resins for use in various applications. With aincredibly versatile, strong and durable panel finish used in many various applications where conventional material facings cannot meet required specifications and standards such as fire ratings, chemical environments, lightweight applications etc. whilst maintaining an attractive appearance. GRP panels can offer high impact resistance when compared to alternative panel facing materials. This panel facing will not dent, rust or corrode.

Fast G-PP

This is our GRP faced panel with a polypropylene core. The most common PP core is a honeycomb Hexagon material Fast G-PP-HEX. This panel is one of our most widely used high performance honeycomb core materials; chosen for its cost competitiveness, excellent strength to weight ratio (the best of all core materials) and bonding characteristics. The GRP-PP is resistant to chemicals and moisture and therefore offer durability and longevity. The panel is 100% recyclable, as part of ensuring ethical and sustainable sourcing of materials.

Fast G-PC

This is our GRP faced panel with a polypropylene core. The most common PP core is a honeycomb Hexagon material Fast G-PP-HEX. This panel is one of our most widely used high performance honeycomb core materials; chosen for its cost competitiveness, excellent strength to weight ratio (the best of all core materials) and bonding characteristics. The GRP-PP is resistant to chemicals and moisture and therefore offer durability and longevity. The panel is 100% recyclable, as part of ensuring ethical and sustainable sourcing of materials.

Fast G-Alu-H

This is our GRP faced panel with a AH – Aluminium Honeycomb: Aluminium Honeycomb core is used in applications where reducing weight whilst maintaining or improving the strength of a panel is of key importance. AH material comes in a range of thicknesses available all offering fantastic strength to weight properties and is ideal for hygienic environments as they are non-shedding. An AH core produces a panel with enhanced stiffness and stability whilst still one of our lightest weight solutions perfect for vehicle body, wall, ceiling and façade applications.

Fast G-PLY

This is our GRP faced panel with a Plywood Core: Various grades, thickness and types of plywood products are available to be incorporated into panel compositions. Any specification can be sourced hardwood, marine, Birch, Poplar core etc to meet client specific performance criteria. FastPanel technical can advise best product composite suited to particular applications.

Fast G-EPS

This is our GRP faced panel with a XPS Extruded polystyrene: XPS is a high performance rigid insulation and unlike EPS is manufactured using a process of extrusion. This continuous process results in a closed cell structure with a smooth skin on the top and bottom of the board. It is a structural insulant which significantly denser than most insulation and is available in various grades for specific applications requiring high loadings and greater compressive strength. Its closed cell structure also resists both moisture and water vapour ingress. XPS offers lambda values of around 0.029 – 0.038 W/m·K.

Fast G-XPS

This is our GRP faced panel with a EPS Expanded polystyrene: EPS is manufactured using beads of foam within a mould, heat or steam is then applied causing them to expand and fuse together. EPS is made of 98% trapped air and only 2% plastic, This process produces a closed cell structure, not a closed cell insulation board, due to voids that can occur between the beads. XPS is a rigid foam insulation made from polystyrene with lambda values of around 0.034 – 0.038 W/m·K

Fast G-PET

This is our GRP faced panel with a RPET Recycled PET: Recycled PET foam is a thermoplastic core material suitable for a variety of composite panel applications to increase performance and reduce weight. Like other heavy-duty foams RPET offers high strength-to-weight ratio, reduced weight, and good thermal insulation. RPET foam has 100% recycled polyethylene terephthalate as the base raw material in the manufacturing results in a RPET insulated core that offer significant savings in CO2 emissions compared to other structural foam core materials. RPET offers lambda values of around 0.034 – 0.046 W/m·K.

Fast G-MW

This is our GRP faced panel with a Mineral Wool: Mineral wool fibre solutions, Rock and Glass based are high performance insulations offering A1 non-combustible solutions to provide the perfect solution for where smoke and fire safety is required.  Mineral fibre cores also offer superior acoustic performance over other insulation core materials. Mineral wool is available with lambda values as low 0.032 W/m·K depending on the panel build up.

Fast G/PU & Fast G/PIR

This is our GRP faced panel with a rigid polyurethane based foam insulation. Option of polyurethane PU or PIR Polyisocyanurate Foam. PIR rigid polyurethane foam insulations in the UK and Ireland are now manufactured as PIR which achieve low thermal values and a better resistance to fire than some foams making them ideal for certain panel applications.

Fast G-PH

This is our GRP faced panel with a Phenolic insulation: Phenolic insulation is a rigid insulation with a closed-cell structure that can achieve a lambda value as low as 0.018 W/m·K.

Steel Panel Range

COMING SOON